Configuring the Application Settings on the Machine

Specify the information to be embedded in the QR code.

1. Log in as the machine administrator from the Smart Operation Panel.

2. On the Home screen, press to display the application list screen, and then press [Smart Device Connector].

3. Press [].

4. For users unable to access the intranet, select [Allow Usage by Guests].
   Specify when to disconnect the smart device automatically as required. If the specified time is too short, the connection may be disconnected while data is transmitted, and an error may occur.

5. Select [Allow Bluetooth Connection] when using Bluetooth to connect to the machine or using the smart device for logging in to and out from the machine.

6. If you are using HTTPS connection, select [Use HTTPS Connection].

7. Press [Exit].

Press the [Menu] key on the control panel, and then use the scroll keys for operations.

1. Press the [Menu] key.

2. Select [Host Interface], and then press the [OK] key.

3. Select [Smart Device Connector], and then press the [OK] key.

4. Select [Guest Use], and then press the [OK] key.

5. Select [Do not Prohibit], and then press the [OK] key.

6. Select [HTTPS Connection], and then press the [OK] key.

7. Select [Use], and then press the [OK] key.