On the menu of RICOH Smart Device Connector, swipe left or right to select [Whiteboard].
Tap [Save to File].
Confirm the method to connect to the whiteboard.
Connect with QR Code
When using the QR code to connect to the machine, check that [Connect with QR Code] is displayed in the upper part of the screen. If a different message is displayed, tap [
], select [Connect with QR Code], and then return to the previous screen.
Connect Machines on Same Network
When connecting to the Whiteboard that is on the same network, the name of the Whiteboard is displayed on the upper part of the screen. If a different message is displayed, tap [], and then select the whiteboard from the list under [Connect Machines on Same Network]. If the Whiteboard you prefer is not on the list, tap [Add Machine], and then add the Whiteboard by reading its QR code or directly entering its IP address or host name.
Save or print the file.
To capture the whiteboard screen, tap [Saving Destination] and specify a location to save the file.
To print the whiteboard screen on the MFP, tap [Saving Destination] and select [Print with MFP]. Printed screen images are not saved in the smart device.
Connect to the whiteboard.
When [Print with MFP] is selected in [Saving Destination], specify how to connect with the device that will be used for printing, and then print the file.
