This section explains how to configure the system settings to use RICOH Smart Device Connector.
Depending on the device in use, the values to specify and the procedure may vary.
Create or install the device certificate on the 4.3-inch Color Touch Panel.
Creating a Self Certificate
Start your web browser.
Enter "http://(the machine's IP address or host name)/" in the address bar.
The top page of Web Image Monitor appears.
If the machine's host name has been registered to the DNS server, you can enter it.
If SSL for the machine has been configured, enter “https:/”.
Click [Network Settings].
Click the [Certificate] tab.
Select [Create New Self-Signed Certificate], and then click [Next].
Configure the following settings displayed on the window:
Common Name (Required): Enter the name of your machine.
Organization (Optional), Organizational Unit (Optional): Enter the organization name that your machine belongs to.
City/Locality (Optional): Enter the name of the municipality that your machine is used in.
State/Province (Optional): Enter the name of the state or province that your machine is used in.
Country/Region (Optional): Enter the name of the country or region that your machine is used in.
Validity Period (days) (Required): Enter the period of time when the self certificate can be valid.
Click [OK].
Exit the web browser.
Importing an Already Created Certificate
Start your web browser.
Enter "http://(the machine's IP address or host name)/" in the address bar.
The top page of Web Image Monitor appears.
If the machine's host name has been registered to the DNS server, you can enter it.
If SSL for the machine has been configured, enter “https:/”.
Click [Network Settings].
Click the [Certificate] tab.
Select [Install Certificate], and then click [Next].
Specify an already created certificate you want to import.
Click [OK].
Exit the web browser.
Section Top
