Skip header

Using a Smart Device to Log in to the MFP

When operating the machine for which the user authentication is specified, you can log in to the machine without entering the user name and password by holding the smart device near its operation panel.


  • This function can only be used on an MFP/printer with Smart Operation Panel.

  • Install Quick Card Authentication function and Bluetooth Authentication Plugin on the device to use this function.

  • Enable [Allow Bluetooth Connection] on Smart Device Connector. See Configuring the QR Code.

  • Register the smart device to the MFP using the Quick Card Authentication function before using this function.


  • You cannot log in to the MFP by holding the smart device near its operation panel while the MFP is in sleep mode.

  • When placing multiple Bluetooth devices side by side, leave a distance of 1 meter or more between them.