You can specify the following settings in this application:
Setting Item |
Description |
---|---|
Copies |
Specify the number of print copies. The default is "1". Specify up to 99. |
Color |
Specify the color mode to print. The default setting is [B & W]. |
Original Orientation |
Specify the orientation of the original. The default is [Readable Direction]. |
2 Sided |
Specify whether to make copies on both sides of the paper, and specify the binding direction. The default is [1 Sided -> 1 Sided]. |
Combine |
Specify the number of pages to print on a single sheet of paper. The default is [Off]. |
Paper Tray |
Specify the input tray. The default is [Auto Paper Select]. |
Use the auto document feeder (ADF) if the original you want to copy is printed on both sides or consists of multiple pages. When you place the original to be copied on the exposure glass, the settings for this application needs to be specified for each page. If you are using a machine without the ADF to copy an original of multiple pages, specify settings on the machine instead of using this application.