On the menu of RICOH Smart Device Connector, swipe left or right to select [Settings].
Tap [Write data to NFC tag].
Tap [Whiteboard].
Tap [Write data to NFC tag].
Tap [Next].
Touch [] that is displayed on the whiteboard screen, and then touch [Use QR Code] to display the QR code on the whiteboard.
Read the QR code with the camera of the smart device.
Enter the administrator password for the whiteboard in [Administrator User Password].
Enter [External App Connctn. Password] when the External Application Connection Password is enabled on the whiteboard.
If necessary, tap [Manual Configuration], and enter the network information such as the SSID, security settings and password that are used to write data to NFC tags.
Tap [Write], and then tap the NFC tag that is affixed on the whiteboard with the smart device.
You can manually configure the settings without reading the QR code by pressing [] on the QR code scanning screen, and then tapping [Manual Configuration].