Previous
When registering and MFP/Printer, connect the machine and smart device to the same network before performing the following procedure.
On the menu of RICOH Smart Device Connector, swipe left or right to select [Connect Machine].
Tap the icon of the machine to which to connect.
Tap [Add Machine].
Select the method to add the machine.
Add by QR code
Read the QR code of a machine to add it.
Add with Bluetooth
Tap the Bluetooth label on the control panel of a machine to add it.
Add by IP Address / Host Name
Specify the IP address or host name of a machine to add it.
Search & Add Machine
Perform a search for a machine on the same network as the smart device to add the machine.
Whether QR code or Bluetooth is supported depends on the model. For details about supported services, see Supported Machines.
Tap [Register] as required.
[Connect Machine] appears when "ON" is selected in [Connect Machine] under [Navigation Display Item] on the [Settings] menu.
