Skip header
 

Using RICOH Smart Device Connector through wireless direct connection

To use the Wireless Direct function on 4-Line LCD Panel, it is also necessary to configure the following settings:

Important

  • In Steps 2 to 6, configure each setting within two minutes.

1Press the [Wi-Fi Direct] key.

The LED of [Wi-Fi Direct] key starts flashing.

2Open the advanced menu from available wireless connection screen in your Android device.

3Tap [Wi-Fi Direct].

4Tap the SSID (DIRECT-XXXXXX) of the machine.

The screen for entering an encryption key is displayed.

5Enter the encryption key of Wi-Fi Direct.

6Confirm the string under the SSID of the machine changes to "connected".