Use this menu to change the layout when printing, and to set 2 sided printing.
Available functions differ depending on the printer or printer driver you are using.
Depending on the printer you are using, this function may not be available.
Restore Defaults
Restores the settings on this menu to the default settings.
Layout:
Select the number of pages printed per sheet. Each document page to be printed on a sheet will be placed in the order selected in the Page Order: list.
Printing Multiple Pages on a Sheet
Page Order:
Select a page layout when two pages or more per sheet is specified in Layout:.
Draw Frame Border
Draws a border around each page.
2 sided:
Prints on both sides of sheets.
Specify how you want to open the bound output in the list.
Booklet:
Prints output so that you can fold it into a booklet.
Printing with a Layout Suitable for Making Booklets
Off
Disables Booklet printing.
Magazine
Two document pages are reduced and printed side by side on each side of each sheet, and then the whole stack is folded in half, like a magazine. For example, an A4 document will be printed as two A5 images on each side of A4 sheets. A Letter size document will be printed as two 5.5" x 8.5" images on each side of Letter size sheets.
Note:
There are only certain sizes of paper applicable for this function.
To print at the same as the original without size reduction, select a paper size that is double that of the original in the Print On: list on the Basic menu.
Creep Adjustment...
Prints the document with the creep adjustment function when Magazine is selected in Booklet:.
Using the Creep Adjustment Function
Edge to Edge Print
Select this when you want to maximize the printable area by minimizing blank space along the edges.
Note:
Print inside the 5mm margin around the paper edges might be of reduced quality.